US Dollars
Features
- CubeCell is Arduino-Compatible
- LoRaWAN US 915 Mhz
- CE and FCC certification
- Based on ASR605x (ASR6501, ASR6502), ASR Microelectronics ASR605x series is highly intergrated and ultra low power SOC based on the PSoC 4000 series MCU (ARM Cortex M0+ Core) and Semtech SX1262 transceiver
- LoRaWAN 1.0.2 support
- Ultra low power design, 3.5uA in deep sleep
- Onboard solar energy management system, can directly connect with a 5.5~7V solar panel
- Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching)
- Micro USB interface with complete ESD protection, short circuit protection, RF shielding, and other protection measures
- Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing
- Good impedance matching and long communication distance
Developing on the Helium Network
The developer documents at the Helium website is top notch. They provide you everything you need to know to get started. Head over to learn how to set up your CubeCell with the Helium Console.Technical Parameters
| Source | Parameter | |
| MCU | ASR6501 (48 MHz ARM® Cortex® M0+ MCU, 128KB FLASH, 16KB SRAM ) | |
| LoRa Chip | ASR6501 (Internal assembled Semtech® LoRa® Transceiver SX1262) | |
| LoRa working band | US_902_928 | |
| LoRa maximum output power | 22 ± 1dB | |
| Hardware resources | UART x 1; SPI x 1; I2C x 1; SWD x 1; PWM x 3 | |
| 12 – bits ADC; 8 – channel DMA engine | ||
| 6 x GPIO | ||
| FLASH | 128KB internal FLASH | |
| Interface | Micro USB x 1; LoRa (IPEX) x 1 | |
| Size | 41.5 x 24.1 x 7.2 mm | |
| USB-UART bridge | CP2102 | |
| Battery Type | 3.7V Lithium (SH1.25 x 2 socket) | |
| Battery detection circuit | √ | |
| External device power control（Vext） | √ | |
| Low power design | Deep Sleep 3.5uA | |
Electrical characteristics
| Electrical characteristics | condition | Minimum | Typical | Maximum |
| Power Supply | USB powered (≥500mA) | 4.7V | 5V | 6V |
| Lithium powered（≥250mA） | 3.3V | 3.7V | 4.2V | |
| 3.3V（pin）powered（≥150mA） | 2.7V | 3.3V | 3.5V | |
| 5V（pin）powered（≥500mA） | 4.7V | 5V | 6V | |
| Power consumption(mA) | LoRa Rx Mode | 10mA | ||
| LoRa 10dBm output | 70mA | |||
| LoRa 14dBm output | 90mA | |||
| LoRa 17dBm output | 100mA | |||
| LoRa 20dBm output | 105mA | |||
| Sleep Mode (USB powered) | 9.6mA | |||
| Sleep Mode (VBAT/battery powered) | 11uA | |||
| Sleep Mode (3.3V header powered) | 3.5uA | |||
| Output | 3.3V pin output | 500mA | ||
| 5V pin output （USB powered only） | Equal to the input current | |||
| External device power control (Vext 3.3V） | 350mA |
- google_product_category:
- 275
- condition:
- new
- google_product_category:
- Electronics > Networking > Modem Accessories
- custom_product:
- true
- vitalsRpk:
- 1647557387
- gender:
- unisex
0 Reviews Hide Reviews Show Reviews
CubeCell Dev-Board Plus (HTCC-AB02) (US915)
$25.94
The HTCC-AB02 is a IoT Dev-Board. Friendly designed for developers, easy to verify communication solutions. With a 0.96-inch OLED display, which can be used to display debugging information, battery...
Sale
CubeCell GPS-6502 US915 (HTCC-AB02S)
$16.99
$32.94
The Heltec CubeCell 6502 (AB02S) IoT LoRaWAN + GPS module can be used in any asset tracking or mapping project. With an ultra low-power design and an onboard solar energy management system that can...
Sale
CubeCell 1/2AA Node US915 (HTCC-AB02A)
$19.99
$27.99
CubeCell 1/2AA Node Features CubeCell 1/2AA is Arduino-Compatible! CE and FCC certification LoRaWAN US 915 Mhz Based on ASR605x (ASR6501, ASR6502), ASR Microelectronics ASR605x series is highly...
Sale
Sale
Helium WisBlock Connected Kit (US915)
$149.99
$159.99
$159.99
The one kit that will let you go from prototype to production for nearly any type of IoT project you can think of. This WisBlock kit is specially made with Helium Network developers in mind and is a...