Dragino

Are you building more Helium Network coverage but do not want to place multiple full hotspots in the same Hex? Do you need to cover your building with better coverage for a sensor deployment? Then...

The LPS8N is an open-source LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi or Ethernet. The LoRa wireless allows users to send data and reach extremely...

The Dragino LSPH01 is a LoRaWAN Soil pH Sensor for IoT of Agriculture. It is IP68 waterproof, designed to measure the soil PH and soil temperature to analyze the soil acid or...

AS-02 is an optional accessory, it is USB Type-C converter. AS-02 provide below feature: 1) Access AT console of LHT52 when used with USB-TTL adapter.  Connection: ✓ USB to TTL GND <-->...

External Temperature Probe based on DS18B20 and intended to be used with the Dragino LHT52 Temperature and Humidity Sensor. External Temperature Probe (AS-01): Resolution: 0.0625 °C ±0...

The Dragino WSS-05 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time. WSS-05 is designed to support the Dragino Weather station solution...

The Dragino WSS-04 is a RS485 rain / snow detect sensor. It can monitor Rain or Snow event.  WSS-04 has auto heating feature, this ensures measurement more reliable. WSS-04 is designed to...

The Dragino WSS-03 is a RS485 Air Quality sensor. It can monitor CO2, PM2.5 and PM10 at the same time. WSS-03 uses weather proof shield which can make sure the sensors are well protected against UV...

The Dragino WSS-02 is a RS485 wind speed and wind direction monitor designed for weather station solution. WSS-02 shell is made of polycarbonate composite material, which has good anti-corrosion and...

The Dragino WSS-01 RS485 Rain Gauge is a weather monitor instrument to monitor rainfall. WSS-01 uses a tipping bucket to detect rainfall. The tipping bucket use 3D streamline shape to make sure it...

The Dragino LHT52 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a built-in Temperature & Humidity sensor and has a USB Type-C sensor connector to connect to...

The Dragino RS485-BL is a RS485 / UART to LoRaWAN Converter for Internet of Things solutions.User can connect RS485 or UART sensor to RS485-BL converter, and configure RS485-BL toperiodically...